Leak Controller is a specialised, very affordable water alarm and shut-off system. Battery operated and fitted with a quick-connector water ball valve, We provide a system that is very easy to install and operate.
Upon sensing moisture, Leak Controller will engage the shut-off valve and sound an alarm. The water source is cut off, stopping the leak while the alarm continues to sound until the valve is manually reset.
By preventing continuous water flow, mould and property damage is restricted and user liability is reduced. Leak Controller is designed for simple installation and operation as shown below:
How It Works
Two screws into mounting bracket into closest wall to water supply. This can be under a sink, behind a refrigerator etc.
After inserting batteries, the system is hung on the mounting bracket.
The plastic or copper water line (1/4″ or 3/8″) is cut and pressed into the quick connect fittings on the valve without tools. Optional adapters are available for flexible or compression-type tubing.
Place some water in a pan or plate laying on the floor surface and observe the direction of water flow. Place the sensor on the floor in the direction of the water flow on a provided mat.
That’s it, you’re done with the installation! Quick and Easy.
The blue LED will flash every 5 seconds to confirm that the Leak Controller is functioning properly and is ready to shut off the water in case of a small or large leak.
Multiple sensors may be connected in series and placed near or surrounding many types of appliances. The Controller comes with one 5 foot length sensor and optional sensors may be purchased in lengths of 8 and 15 feet.